![]() ![]() ![]() ![]() The shift cable is designed to be fixed into this groove, however, due to the angle of the groove not aligning with the travel of the cable, it can be a little tricky to lock the cable taught in this exact position. Before connecting the shift cable to the derailleur, look for the groove in the upper arm (pictured below).Make sure that the friction shifter for the front derailleur is all the way forward and resting against the stop (so no cable is wound-in).I then aligned the lower outside edge of the cage to be parallel with the large chain ring (just like a modern Shimano derailleur).I set the height of the derailleur so the lower outside edge of the cage clears the tallest teeth of the large chain ring by approx.The following instructions are the method I used to set-up the front derailleur on my vintage Colnago road bike and it works very well. Campagnolo Super Record front derailleur parts schematic (clamp) Installing the Front Derailleur ![]()
0 Comments
Leave a Reply. |
Details
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |